Dry Film Roll Laminators
A 350mm
and 650mm dry film roll laminator for simple and effective laminating of rolls
of Dry Film Photoresist to various substrates. The units are particularly useful
for both printed circuit board production and the lamination of dry film to
brass, steel etc for metal etching applications. Both sides of the substrate are
simultaneously laminated. The machines use accurate controlled temperature and
feed and automatically remove the polyofin separator sheet of the dry
film.
Main features include:
- Exclusive pre-set temperature and speed setting programs for a variety of
applications just by Pressing a button on the digital display panel.
- Adjustable override controls for both temperature and speed to compensate
for variations in material or conditions.
- Heater roller and pressure roller construction in silicon rubber allows
roller gap adjustment ensuring correct pressure for panels up to 4 mm thick.
- Function button displays actual roller temperature during operation.
- Instant switch from Centigrade to Fahrenheit
- Warm-up time only 10 minutes due to the Infrared heater design which gives
better heat distribution and control.
- Ready and Wait visual and audible signals alert operator to laminator
readiness thus reducing errors.
- 8 Bit microprocessor digital heat controller permits precise setting and
guarantees fast response times.
- Reverse function button allows easy film clear from the machine.
-
| Specifications: |
| Max working width: |
model 305mm
model 610mm |
| Temperature range: |
0 - 160ºC |
| Lamination speeds: |
0 - 1.6 metres/min variable in 10 stages |
| Power requirements: |
220/240v 50/60Hz Single phase 12Amp |
| Shipping dimensions (mm): |
model : 670W x 500H x 690L
model : 670W x 500H
x1010L |
| Shipping weight: |
model 35 kilos
model 49
kilos |
| Desktop Laminators |
| |
|
|
| |
|
|
| |
| Whatever the application bringing - Lamination service shop,
Print shop, Photo shop, Copy center, Advertising material manufacturer, ID card
issuing agency, etc. |
| |
SPECIFICATION |
| Model |
포토닉235 |
포토닉325 |
포토닉325R6 |
| Laminating Speed |
0.74m/min |
0.74m/min |
2.15m/min |
| Laminating Width |
235mm |
325mm |
325mm |
| Laminating Films |
75mic~300mic |
75mic~300mic |
75mic~300mic |
| Thickness of substrate(Paper) |
80g/㎡~2mm |
80g/㎡~2mm |
80g/㎡~2mm |
| Thickness of Mount |
3mm |
3mm |
3mm |
| Power Requirements |
AC220V-240V, 50/60Hz |
AC220V-240V, 50/60Hz |
AC220V-240V, 50/60Hz |
| Power Consumption |
870W, 4.0A |
970W, 4.4A |
1,200W, 5.45A |
| Warm Up Time |
5min |
5min |
5min |
| Heating System |
Infrared Heater |
Infrared Heater |
Infrared Heater |
| Operating Temperature |
150℃ Max. |
150℃ Max. |
150℃ Max. |
| Clam shell open |
X |
X |
X |
| Speed Control |
Key Pad Number Direct |
Key Pad Number Direct |
Key Pad Number Direct |
| Temperature Control |
Key Pad Temp. Direct |
Key Pad Temp. Direct |
Key Pad Temp. Direct |
| Dimensions(WXLXH) |
495 X 274 X 147 mm |
585 X 274 X 147 mm |
585 X 284 X 147 mm
| | | |
|
| | |
PCB용
드라이필름
다양한 유저의 요구대로 드라이필름을 공급합니다.
반도체 - PCB - LCD - FPC
연구장비-생산장비, 실습-연구기자재, 전자재료 공급
스핀코터,마스크얼라이너, 4포인트프로브, 표면저항측정기, 와이어본더, 진공
펌프,
PCB샘플제작시스템,
디솔더링, 솔더링, Stencil Printer, BGA-SMD REWORK
SYSTEM, Wave soldering system, Reflow (리플로우 오븐)
선하야토 감광기판, 노광기, 현상기, 에칭기,
pcb에어졸, 키엔스센서, IC아답터 & 소켓,
레이저스펙트로미터, 전주도금기, 홀로그래픽, chiller (Neslab),
스크라이버,
PCB코팅제-세정제, 각종 소모품, 전자부품-전자재료 유통 납품업 & 수출입.
TEL :
02-868-0661 (代)
pcb21@korea.com
High
speed for hot & cold laminating, mounting, transfer - professional laminator
for various lamination